Change Adt Safewatch Pro 3000 Chime Battery
1
Put the alarm system into test mode
Enter your [CODE] and then press the TEST button.
2
Locate and open your control panel
Your alarm system’s control panel is most often located in a garage, basement, or attic. Once located, open the control panel by removing the two screws.
3
Remove the old battery
Disconnect the two connectors from the old battery and remove it from the control panel.
4
Install the new battery
You’ll need to use this 12V 7A battery as a replacement.
Place the new battery in the control panel and connect it to the alarm system, being sure to connect the red positive (+) and black negative (-) connectors correctly.
When you’re done, close the control panel.
5
Exit test mode
To exit test mode, reenter your [CODE] and press the TEST button again.
You’re all done!